/*
  Melody
 
 Plays a melody 
 
 circuit:
 * 8-ohm speaker on digital pin 8
 
 created 21 Jan 2010
 modified 30 Aug 2011
 by Tom Igoe 

This example code is in the public domain.
 
 http://arduino.cc/en/Tutorial/Tone
 
 */
 #include "pitches.h"

int piezoPin = 9 ;
// notes in the melody:
int melody[] = {
  NOTE_C4, NOTE_G3,NOTE_G3, NOTE_A3, NOTE_G3,0, NOTE_B3, NOTE_C4};

// note durations: 4 = quarter note, 8 = eighth note, etc.:
int noteDurations[] = {
  4, 8, 8, 4,4,4,4,4 };

void setup() {
  // iterate over the notes of the melody:
  for (int thisNote = 0; thisNote < 8; thisNote++) {

    // to calculate the note duration, take one second 
    // divided by the note type.
    //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
    int noteDuration = 1000/noteDurations[thisNote];
    tone(piezoPin, melody[thisNote],noteDuration);

    // to distinguish the notes, set a minimum time between them.
    // the note's duration + 30% seems to work well:
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    // stop the tone playing:
    noTone(piezoPin);
  }
}

void loop() {
  // no need to repeat the melody.
  // RESET to play again
}

/* Domande
1. Codificare Twinkle twinkle little star
2. Modificare lo script pitch follower (fotoresistenza + piezo) 
   per suonare una serie di beep durante la fase di calibrazione
   e un breve motivetto (magari una scala crescente) per confermare
   l'avvenuta calibrazione.
3. Codificare (magari utilizzando dei loop) qualche suono di allarme / conferma.
*/