--- /dev/null
+#include <CapacitiveSensor.h>
+
+/*
+ * CapitiveSense Library Demo Sketch
+ * Paul Badger 2008
+ * Uses a high value resistor e.g. 10M between send pin and receive pin
+ * Resistor effects sensitivity, experiment with values, 50K - 50M. Larger resistor values yield larger sensor values.
+ * Receive pin is the sensor pin - try different amounts of foil/metal on this pin
+ */
+
+
+CapacitiveSensor cs_4_2 = CapacitiveSensor(4, 2); // 10M resistor between pins 4 & 2, pin 2 is sensor pin, add a wire and or foil if desired
+// pin 8 is sensor pin, add a wire and or foil
+const int led = 13; // pin that the Piezo is attached to
+int sensorMin = 50; // minimum sensor value
+int sensorMax = 3200; // maximum sensor value
+void setup()
+{
+ cs_4_2.set_CS_AutocaL_Millis(0xFFFFFFFF); // turn off autocalibrate on channel 1 - just as an example
+ Serial.begin(9600);
+ pinMode(led, OUTPUT);
+}
+
+void loop()
+{
+ long start = millis();
+ long total1 = cs_4_2.capacitiveSensor(30);
+
+ if (total1 > (sensorMax / 2 - sensorMin)) {
+ digitalWrite(led, HIGH);
+ delay(100);
+ }
+ else {
+ digitalWrite(led, LOW);
+ delay(100);
+ }
+
+ Serial.print(millis() - start); // check on performance in milliseconds
+ Serial.print("\t Capacitance: "); // tab character for debug windown spacing
+
+ Serial.println(total1); // print sensor output 1
+ delay(1); // arbitrary delay to limit data to serial port
+
+}