+++ /dev/null
-/*
- Blink v4
- Accensione e spegnimanto di un LED utilizzando un ciclo
- iterativo for per comandare il lampeggio.
-
- This example code is in the public domain.
- */
-
-// Pin 13 has an LED connected on most Arduino boards.
-// give it a name:
-int led = 13;
-int breve = 200; // Variabile richiambile nel corso dell'esecuzione
-int lunga = 1000;
-
-// the setup routine runs once when you press reset:
-void setup() {
- // initialize the digital pin as an output.
- pinMode(led, OUTPUT);
-}
-
-// the loop routine runs over and over again forever:
-void loop() {
- for (int i = 0, i <10, i++) {
-// (Definizione iteratore, condizione di verifica, gestione dell'iteratore)
- rapido(); // accende e spegne rapidamente il LED
- }
-
- lento(); // accende e spegne lentamente il LED
- // Domanda: dobbiamo preoccuparci dell'iteratore?
-}
-
-// Funzioni create dall'utente:
-
-void rapido() {
- // Accende e spegne rapidamente il LED
-
- // sequenze di istruzione: accendere e spegnere il LED
- digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
- delay(breve); // wait for a second
- digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
- delay(breve); // wait for a second
-}
-
-void lento() {
- // Accende e spegne lentamente il LED
-
- // sequenze di istruzione: accendere e spegnere il LED
- digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
- delay(lunga); // wait for a second
- digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
- delay(lunga);
-}
-
-