clean up

[sketchbook_andrea] / shift_register / shift_register_8bit / shift_register_8bit.ino

diff --git a/shift_register/shift_register_8bit/shift_register_8bit.ino b/shift_register/shift_register_8bit/shift_register_8bit.ino
deleted file mode 100644 (file)
index 7ce253e..0000000
--- a/shift_register/shift_register_8bit/shift_register_8bit.ino
+++ /dev/null
@@ -1,43 +0,0 @@
-//**************************************************************//
-// Name : shiftOutCode, Hello World
-// Author : Carlyn Maw,Tom Igoe, David A. Mellis
-// Date : 25 Oct, 2006
-// Modified: 23 Mar 2010
-// Version : 2.0
-// Notes : Code for using a 74HC595 Shift Register
-//
-// : to count from 0 to 255
-//****************************************************************
-
-
-//Pin connected to ST_CP of 74HC595
-int latchPin = 8;
-//Pin connected to SH_CP of 74HC595
-int clockPin = 12;
-////Pin connected to DS of 74HC595
-int dataPin = 11;
-void setup() {
-  //set pins to output so you can control the shift register
-  pinMode(latchPin, OUTPUT);
-
-pinMode(clockPin, OUTPUT);
-pinMode(dataPin, OUTPUT);
-}
-void loop() {
-  // count from 0 to 255 and display the number
-  // on the LEDs
-  for (int numberToDisplay = 0; numberToDisplay < 256; numberToDisplay++) {
-    // take the latchPin low so
-    // the LEDs don’t change while you’re sending in bits:
-    digitalWrite(latchPin, LOW);
-    // shift out the bits:
-    shiftOut(dataPin, clockPin, MSBFIRST, numberToDisplay);
-    //take the latch pin high so the LEDs will light up:
-    digitalWrite(latchPin, HIGH);
-    // pause before next value:
-    delay(500);
-  }
-}
-
-
-