X-Git-Url: http://git.piffa.net/web?a=blobdiff_plain;f=programming%2Floops%2Floop_4_multi_led_array%2Floop_4_multi_led_array.ino;fp=programming%2Floops%2Floop_4_multi_led_array%2Floop_4_multi_led_array.ino;h=0000000000000000000000000000000000000000;hb=81ae6f5410398f1f3a59b671aa400338a8748284;hp=3b5ddef45c9dc14841cb89391cdc3001582a64d7;hpb=0ef9dc22a6c180ef5470b5dd1389ba297a7d1e39;p=sketchbook_andrea

diff --git a/programming/loops/loop_4_multi_led_array/loop_4_multi_led_array.ino b/programming/loops/loop_4_multi_led_array/loop_4_multi_led_array.ino
deleted file mode 100644
index 3b5ddef..0000000
--- a/programming/loops/loop_4_multi_led_array/loop_4_multi_led_array.ino
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-  For Loop Iteration
- 
- Demonstrates the use of a for() loop.
- Lights multiple LEDs in sequence, then in reverse.
- 
- The circuit:
- * LEDs from pins 2 through 9 to ground
- 
- Schemi:
- - http://lab.piffa.net/schemi/8_led_single_res_bb.png
- - http://lab.piffa.net/schemi/8_led_single_res_schem.png
- 
- http://www.arduino.cc/en/Tutorial/ForLoop
- */
-
-byte ledPins[8] = {  // Domanda: cosa succede se uso int?
-  2,3,4,5,6,7,8,9} 
-; //Array
-int timer = 100;           // Pausa per far brillare i LED
-
-void setup() {
-  Serial.begin(9600);
-  // use a for loop to initialize each pin as an output:
-  for (int thisPin = 0; thisPin < sizeof(ledPins); thisPin++)  {
-    pinMode(ledPins[thisPin], OUTPUT);
-    Serial.print("Inizializzato pin n. ");
-    Serial.println(  thisPin);
-  }
-
-  Serial.print("Dimesione array: ");
-  Serial.println(sizeof(ledPins));
-}
-
-void loop() {
-  // loop from the lowest pin to the highest:
-  for (int thisPin = 0; thisPin < sizeof(ledPins); thisPin++) {
-    Serial.print("Accensione pin n. ");
-    Serial.println(thisPin);
-    // turn the pin on:
-    digitalWrite(ledPins[thisPin], HIGH);  
-    delay(timer);                  
-    // turn the pin off:
-    digitalWrite(ledPins[thisPin], LOW);    
-    // Debug
-
-  }
-
-  // loop from the highest pin to the lowest:
-  for (int thisPin = sizeof(ledPins) -1 ; thisPin > 0; thisPin--) {
-    Serial.print("Accensione pin n. "); // Gli array sono indicizzati da 0
-    Serial.println(thisPin);
-    // ><<turn the pin on:
-    digitalWrite(ledPins[thisPin], HIGH);
-    delay(timer);
-    // turn the pin off:
-    digitalWrite(ledPins[thisPin], LOW);
-
-  }
-}
-
-
-