Blink sviluppo.

diff --git a/basic/blink_sviluppo/blink_3_variables_two_led/blink_3_variables_two_led.ino b/basic/blink_sviluppo/blink_3_variables_two_led/blink_3_variables_two_led.ino
new file mode 100644 (file)
index 0000000..49b10a8
--- /dev/null
+++ b/basic/blink_sviluppo/blink_3_variables_two_led/blink_3_variables_two_led.ino
@@ -0,0 +1,34 @@
+/*
+  Blink v3
+  Now with 2 variables and an extra LED (remember a ~320 ohms resistor).
+  Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+  This example code is in the public domain.
+ */
+ 
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+int red = 12;
+int breve = 200;
+int lunga = 1000;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);     
+  pinMode(red, OUTPUT);
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(breve);               // wait for a second
+  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+  delay(breve);               // wait for a second
+
+  digitalWrite(red, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(lunga);               // wait for a second
+  digitalWrite(red, LOW);    // turn the LED off by making the voltage LOW
+  delay(lunga); 
+}

diff --git a/basic/blink_sviluppo/blink_3_variables_two_led_functions/blink_3_variables_two_led_functions.ino b/basic/blink_sviluppo/blink_3_variables_two_led_functions/blink_3_variables_two_led_functions.ino
new file mode 100644 (file)
index 0000000..ae8a6cd
--- /dev/null
+++ b/basic/blink_sviluppo/blink_3_variables_two_led_functions/blink_3_variables_two_led_functions.ino
@@ -0,0 +1,42 @@
+/*
+  Blink v3
+ Now with 2 variables and an extra LED (remember a ~320 ohms resistor).
+ Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+ This example code is in the public domain.
+ */
+
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+int red = 12;
+int breve = 200;
+int lunga = 1000;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);     
+  pinMode(red, OUTPUT);
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+lightRed();
+lightGreen();
+}
+
+void lightRed() {
+  digitalWrite(red, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(lunga);               // wait for a second
+  digitalWrite(red, LOW);    // turn the LED off by making the voltage LOW
+  delay(lunga); 
+}
+
+void lightGreen() {
+  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(breve);               // wait for a second
+  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+  delay(breve);               // wait for a second
+}
+

diff --git a/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments/blink_3_variables_two_led_functions_arguments.ino b/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments/blink_3_variables_two_led_functions_arguments.ino
new file mode 100644 (file)
index 0000000..7996555
--- /dev/null
+++ b/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments/blink_3_variables_two_led_functions_arguments.ino
@@ -0,0 +1,45 @@
+/*
+  Blink v3
+ Now with 2 variables and an extra LED (remember a ~320 ohms resistor).
+ Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+ This example code is in the public domain.
+ */
+
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+int red = 12;
+int breve = 200;
+int lunga = 1000;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);     
+  pinMode(red, OUTPUT);
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+lightRed(lunga);
+lightRed(breve);
+
+lightGreen(breve);
+lightGreen(lunga);
+}
+
+void lightRed(int length) { // Argomento
+  digitalWrite(red, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(length);               // wait for a second
+  digitalWrite(red, LOW);    // turn the LED off by making the voltage LOW
+  delay(length); 
+}
+
+void lightGreen(int  length) {
+  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(length);               // wait for a second
+  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+  delay(length);               // wait for a second
+}
+

diff --git a/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments_button/blink_3_variables_two_led_functions_arguments_button.ino b/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments_button/blink_3_variables_two_led_functions_arguments_button.ino
new file mode 100644 (file)
index 0000000..39ae271
--- /dev/null
+++ b/basic/blink_sviluppo/blink_3_variables_two_led_functions_arguments_button/blink_3_variables_two_led_functions_arguments_button.ino
@@ -0,0 +1,48 @@
+/*
+  Blink v3
+ Now with 2 variables and an extra LED (remember a ~320 ohms resistor).
+ Turns on an LED on for one second, then off for one second, repeatedly.
+ 
+ This example code is in the public domain.
+ */
+
+// Pin 13 has an LED connected on most Arduino boards.
+// give it a name:
+int led = 13;
+int red = 12;
+int button = 2;
+int breve = 200;
+int lunga = 1000;
+
+// the setup routine runs once when you press reset:
+void setup() {                
+  // initialize the digital pin as an output.
+  pinMode(led, OUTPUT);     
+  pinMode(red, OUTPUT);
+  pinMode(button, INPUT);
+}
+
+// the loop routine runs over and over again forever:
+void loop() {
+ if (digitalRead(button) == HIGH) { // HIGH sta per +5v
+   lightRed(breve);
+ }
+ if (digitalRead(button) == LOW) { // LOW sta per 0v                  
+   lightGreen(breve);
+ }
+}
+
+void lightRed(int length) { // Argomento
+  digitalWrite(red, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(length);               // wait for a second
+  digitalWrite(red, LOW);    // turn the LED off by making the voltage LOW
+  delay(length); 
+}
+
+void lightGreen(int  length) {
+  digitalWrite(led, HIGH);   // turn the LED on (HIGH is the voltage level)
+  delay(length);               // wait for a second
+  digitalWrite(led, LOW);    // turn the LED off by making the voltage LOW
+  delay(length);               // wait for a second
+}
+

diff --git a/libraries/readme.txt b/libraries/readme.txt
new file mode 100644 (file)
index 0000000..a8f1390
--- /dev/null
+++ b/libraries/readme.txt
@@ -0,0 +1 @@
+For information on installing libraries, see: http://arduino.cc/en/Guide/Libraries