From: root <root@conny.piffa.net>
Date: Sat, 26 Nov 2016 03:29:48 +0000 (+0100)
Subject: Example
X-Git-Url: http://git.piffa.net/web?a=commitdiff_plain;h=4588166b759723ba1a8660b334c51eea89440cdb;p=sketchbook_andrea

Example
---

diff --git a/advanced_projects/capacitance/CapacitiveSensorSketch/CapacitiveSensorSketch.ino b/advanced_projects/capacitance/CapacitiveSensorSketch/CapacitiveSensorSketch.ino
new file mode 100644
index 0000000..a036612
--- /dev/null
+++ b/advanced_projects/capacitance/CapacitiveSensorSketch/CapacitiveSensorSketch.ino
@@ -0,0 +1,39 @@
+#include <CapacitiveSensor.h>
+
+/*
+ * CapitiveSense Library Demo Sketch
+ * Paul Badger 2008
+ * Uses a high value resistor e.g. 10M between send pin and receive pin
+ * Resistor effects sensitivity, experiment with values, 50K - 50M. Larger resistor values yield larger sensor values.
+ * Receive pin is the sensor pin - try different amounts of foil/metal on this pin
+ */
+
+
+CapacitiveSensor   cs_4_2 = CapacitiveSensor(4,2);        // 10M resistor between pins 4 & 2, pin 2 is sensor pin, add a wire and or foil if desired
+CapacitiveSensor   cs_4_6 = CapacitiveSensor(4,6);        // 10M resistor between pins 4 & 6, pin 6 is sensor pin, add a wire and or foil
+CapacitiveSensor   cs_4_8 = CapacitiveSensor(4,8);        // 10M resistor between pins 4 & 8, pin 8 is sensor pin, add a wire and or foil
+
+void setup()                    
+{
+   cs_4_2.set_CS_AutocaL_Millis(0xFFFFFFFF);     // turn off autocalibrate on channel 1 - just as an example
+   Serial.begin(9600);
+}
+
+void loop()                    
+{
+    long start = millis();
+    long total1 =  cs_4_2.capacitiveSensor(30);
+    long total2 =  cs_4_6.capacitiveSensor(30);
+    long total3 =  cs_4_8.capacitiveSensor(30);
+
+    Serial.print(millis() - start);        // check on performance in milliseconds
+    Serial.print("\t");                    // tab character for debug windown spacing
+
+    Serial.print(total1);                  // print sensor output 1
+    Serial.print("\t");
+    Serial.print(total2);                  // print sensor output 2
+    Serial.print("\t");
+    Serial.println(total3);                // print sensor output 3
+
+    delay(10);                             // arbitrary delay to limit data to serial port 
+}