3 Accensione e spegnimanto di un LED utilizzando un ciclo
4 iterativo while per comandare il lampeggio.
6 This example code is in the public domain.
9 // Pin 13 has an LED connected on most Arduino boards.
12 int breve = 200; // Variabile richiambile nel corso dell'esecuzione
14 int iterator = 0; // Defniamo un variabile per controllare un ciclo iterativo
16 // the setup routine runs once when you press reset:
18 // initialize the digital pin as an output.
22 // the loop routine runs over and over again forever:
24 while (iterator <10) {
25 rapido(); // accende e spegne rapidamente il LED
26 iterator = iterator +1 ; // incrementa l'iteratore
27 // iterator++ ; // equivalente
29 lento(); // accende e spegne lentamente il LED
30 // Domanda: a quanto equivale iterator ora?
33 // Funzioni create dall'utente:
36 // Accende e spegne rapidamente il LED
38 // sequenze di istruzione: accendere e spegnere il LED
39 digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
40 delay(breve); // wait for a second
41 digitalWrite(led, LOW); // turn the LED off by making the voltage LOW
42 delay(breve); // wait for a second
46 // Accende e spegne lentamente il LED
48 // sequenze di istruzione: accendere e spegnere il LED
49 digitalWrite(led, HIGH); // turn the LED on (HIGH is the voltage level)
50 delay(lunga); // wait for a second
51 digitalWrite(led, LOW); // turn the LED off by making the voltage LOW